Repair & Maintain
Restore Performance, Extend Service Life
The Equipment Is Down and the Replacement Has a Long Lead Time
High-wear equipment fails on its own schedule, not yours. And the moment it does, you are choosing between a lead time you cannot absorb, a quote for a new unit you did not budget, and a repair you are not sure will hold. Once it is back, the same wear starts again — and that part can be planned for.
A new unit is months away
Lead times on heavy equipment do not care that your operation is already short a machine. Production waits while the order sits in a queue somewhere.
Why it cracked matters as much as the crack
A weld laid over a crack without addressing what loaded it buys weeks, not years. The failure returns in the same spot, usually at a worse time.
The wear is worth less than the asset
Plenty of assets written off as finished are structurally sound underneath the wear — and cost a fraction of a new unit to bring back into service.
The next repair can be a scheduled one
Wear is predictable in a way failure is not. We can work out the intervals and the wear checks for a unit we have rebuilt — and carry them out — so the work lands when you plan it.
What waiting costs
Downtime is production you never get back
A machine out of service is not a deferred cost. Every day it sits is throughput that was scheduled, staffed, and never ran.
The second failure costs more than the first
Cracks propagate and worn surfaces load the components around them. What starts as a repairable section becomes a structural rebuild, or a write-off.
Replacement capital is committed capital
Money spent replacing an asset that could have been rebuilt is money not available for the upgrade that would have moved your operation forward.
Look At It · Quote · Repair · Maintain
- Look at it
- From photographs, in our shop, or at your yard.
- Quote
- What it takes and what it costs — including when the answer is that it is not worth doing.
- Repair
- Reinforced, replaced, hardfaced or rebuilt, depending on what the wear has done.
- Maintain
- Intervals and wear checks set for the unit, and carried out, if you want them.
Bring It Back, Better Than It Was
The equipment that takes the most abuse and cannot afford to fail:
- Cement trucks and mixer components
- Construction equipment buckets and attachments
- Dumpsters and waste handling equipment
- Structural components and frames
- High-wear parts exposed to abrasion, impact, and corrosion
Repair means reinforcement at the high-stress areas, replacement of compromised material, hardfacing where abrasion is what is killing it, and structural work that restores integrity. A rebuild is also the cheapest time to change something — if you want the unit modified, it happens while it is already apart. We repair for service life, not appearance.
Get Your Equipment Back to Work
If you've got equipment that is worn down, damaged, or underperforming, we can help you restore it, extend its service life, and keep it on an interval afterward.
We'll get back to you to look at the unit and help you understand what is worth doing.
Serving: Apex · Asheboro · Burlington · Cary · Chapel Hill · Danville · Durham · Greensboro · Henderson · High Point · Lexington · Raleigh · Wake Forest · Winston-Salem